Pre-engineered building structures
Steel buildings designed around the use, the span and the site, for industrial, commercial and institutional projects.
Engineered for efficiency, built for purpose
Pre-engineered building (PEB) structures give warehouses, factories, workshops and commercial buildings a steel frame designed for the job they have to do: the clear span, the height, the loads and the layout.
WhiteShed Solutions LLP designs, fabricates and installs PEB structures alongside its tensile and retractable roof work, with the same in-house team handling design coordination, fabrication at our Thane factory and installation on site.
Typical applications
- Industrial facilities
- Warehouses
- Commercial buildings
- Workshops
- Institutional infrastructure
Book a free consultation
Share drawings, site photographs and the approximate area. Our team checks feasibility and sends a project-specific estimate.
Why choose a PEB structure?
Efficient structural design
Members are sized to the span and loads, so steel goes where it is needed and floor space stays usable.
Adaptable configurations
Spans, heights, openings and mezzanines are planned around the project’s requirements.
Streamlined fabrication
Components are fabricated off site and assembled on site, which keeps site work focused.
Functional and cost-conscious
A practical building envelope for industrial, commercial and institutional use.
PEB structures, explained
What is a pre-engineered building?
A pre-engineered building is a steel building whose frame, including columns, rafters, purlins and bracing, is designed for a specific span, height and load, fabricated off site and bolted together on site. Because the parts are made to the design rather than cut on site, construction is more predictable than a conventional site-built shed.
What should a PEB project plan for?
- Clear span and eave height for the work inside, including racking, machinery or cranes.
- Roofing and wall cladding, daylight panels and ventilation.
- Doors, loading bays and canopies.
- Foundations and ground conditions.
- Room for a future extension along the length of the building.
Covered loading areas and walkways next to a PEB can be built as tensile structures.
From concept to completion
01
Site visit and measurement
We measure the area and check where the frame can be anchored.
02
Design and engineering
Drawings, structural checks and the material layout are prepared for approval.
03
Fabrication
The frame and components are made to the approved drawings.
04
Installation
Our team installs the structure and completes the finishing and drainage details.
05
Inspection and handover
The structure is inspected and handed over after completion.
Frequently asked questions
Yes. PEB structures are part of WhiteShed’s architectural and structural solutions, handled by the same in-house team from design coordination and fabrication to installation.
Yes. Tensile canopies are often added over loading bays, entrances and walkways beside a PEB building.
Drawings or a site plan, the required span, height and length, and how the building will be used. Our team checks feasibility and sends a project-specific estimate.
WhiteShed delivers from its Thane factory to projects across Maharashtra, Gujarat, Rajasthan, Uttar Pradesh, Kerala, Kolkata and Kathmandu.
Specifications at a glance
Frame
Steel primary and secondary members, designed to the project’s span and loads
Fabrication
At the WhiteShed factory, Shilphata, Thane
Applications
Industrial facilities, warehouses, commercial buildings, workshops and institutional infrastructure
Planning an industrial or commercial building?
Share your drawings, site photographs and approximate area, and our team will check feasibility and send a project-specific estimate.
WhiteShed Solutions LLP executes projects across Maharashtra, Gujarat, Rajasthan, Uttar Pradesh, Kerala, Kolkata and Kathmandu. See where we work.